Typical Problems Encounted During Ex m and Ex q Inspection
Published
Read Time: 2 mins
Throughout any inspection campaign non-compliant issues are going to be found. Here are some common issues we have found whilst conducting
inspections on encapsulated or sand or quartz powder filled equipment.
- Documentation missing or incorrect
- No certificate of conformity
- Not IECEx or ANZEx certified with no Conformity Assessment Document.
- Labels missing or not illegible
- Cable damage
- Cracks or damage to the enclosure or encapsulation material
- Signs of heat damage
- Missing or damaged bolts, gaskets or sealants
- Incorrect use of the equipment
What others can you think of?
This material is produced by HAZ. The information is of a general nature only and should not be relied upon. Each set of
circumstances associated with compliance of hazardous
areas and Type
B compliance
is unique and expert advice on your particular circumstances should be sought. HAZ accepts no liability for any reliance on the
information published on this website.